Preparation of the area under the Pavilion

 

A place must be prepared before delivery of the modular building. This requirement is the preparation of the substrate. This is mainly aimed at leveling the ground / surface area. Depending on the size and type of the building, we always advise on the option. There are various types of preparation of the ground base during the construction of the modular building.

Today I will briefly discuss the concrete foundation which in our opinion is the best solution

– concrete base

The beethoven base can be used to prepare the ground under our portable cabins. The concrete base is the best choice for ground preparation and we often recommend it to our clients. The main reason is the reliability of the concrete base. In particular, if the construction is to be carried out on a soft surface, the large slab of the concrete base will prevent the foundation of the building from settling on either side. The concrete base prepared in the right way is a very stable and safe ground. When the ground base is checked, discussed with our architect and prepared in the right way, all potential problems with building settlement will be avoided.

The concrete base may seem a little more difficult in terms of preparation compared to other available methods of substrate preparation. This is definitely a more time-consuming but properly prepared concrete base is a safe, long-lasting substrate solution.

I would like to emphasize the concrete base is a universal and safe option, but it is not the only option.

In future articles, we will discuss other options for the preparation of the ground base.

Efekt modern facades

Steel elevations ensure durability, and at the same time, the elegant appearance of the building in a modern style, perfectly matching the standards of the 21st century. They can be covered with walls made of various materials, such as sandwich panels, wood, bricks and more. Our steel facade panels can have a variety of colors to best suit your building. In addition, they perfectly isolate both from excessive heat and frost.
Read more

Modular Buildings EFEKT whats is it??

Modular buildings, offices, etc. are erected from two or more individual steel-framed modules. Modules are connected end to end, side to side and in multiple storeys to generate buildings of size and configuration to suit the individual requirement. The individual modules are delivered to site fully fitted out, in preparation to be craned into the correct place and installed efficiently and as fast possible. 

All modular building systems meet all permanent building regulations, providing versatile buildings suitable for long-term use. They can accommodate large numbers of people and are designed to meet all customers’ specific requirements. They are widely used by schools, universities or business of all local authorities, hospitals and healthcare providers.

Soon more information

Roof panel of a modular building, pavilion, portable buildings Efekt

The roof panels of our pavilions can also be used for roof coverings in: public facilities (office buildings, administration and social buildings, back-office facilities, supermarkets), sports and exhibition facilities (sports and entertainment halls, swimming pools), commercial buildings and industrial buildings (cold stores, freezers, dryers, storage rooms, food processing plants, workshops, car washes, car dealerships, service stations), halls and hangars (industrial, storage, production), objects of the so-called container construction (pavilions, catering kiosks), modular buildings, portable buildings, commercial and service facilities, petrol stations, terminals (airports, border crossings), stations, depots, industrial and sports halls, production and storage buildings, trade and service pavilions, catering pavilions, construction facilities, social and administrative buildings, operating cabins located in covered production halls, etc.

If technical approvals allow such a possibility, some types of roof panels may also be used for the construction of ceilings from the inside.

Walls of a modular building Efekt

Sandwich panels are characterized by low own weight while maintaining high energy-saving parameters, therefore the sandwich panels of our production are an ideal cladding material for low-cost construction with the possibility of easy dismantling of sandwich panels and construction and changing the location of the facility without compromising the insulation parameters of such a building.

The plate is mounted to the structure using self-drilling screws.

In addition, the impressive surface and color of the sandwich panels provide a wide range of architectural solutions. Our company, striving to satisfy all the requirements and needs posed by our client, we offer a whole range of colors of sandwich panels (all colors in the RAL palette available after additional arrangements). The standard color of the board is white. We invite you to the article: “Why choose the white color of the roof sandwich panel”.

In the production of our board, as an additional solution, we use a soft polyurethane foam insert that fulfills two tasks:

Filling the gap on the joining of two plates removes the freezing point
It eliminates the use of mounting foams
The sandwich panel is made of galvanized sheet steel on both sides. Steel sheets coated prior to painting pass the hot dip galvanizing phase. The next step is to “coat” the surface with coatings of different chemical composition.
The basic coatings used for the production of sandwich panels are polyesters, polyurethane paints and PVDF. The final stage is to protect the surface with a protective film.
The sheet metal colors used for the production of sandwich panels are determined with the customer in accordance with the RAL color classification.
The filling of the board is depending on the needs: Styrofoam, polyurethane foam or mineral wool.

Fast assembly of the 8×6 pavilion built of three modules

Fast assembly of the 8×6 pavilion built of three modules in Schweinnfurt, Germany
It took us only one day to assemble the pavilion measuring 8m x 6m. The modular building was built of three modules.
Standard equipment. In the previous post you can see the loading of this pavilion in our company in Efekt.
Below you can see the unloading and assembly of the portable building.
In the near future we are going to the Netherlands to build another very popular pavilon with dimensions of 6m x 5m
I encourage you to follow the posts.

Additional protection on the roof of our Modular Buildings

A few words about the additional protection we give to the roofs of our pavilions, technical approvals and approvals

PVC roof waterproofing membranes is a product group that NBI know very well.Different field investigations as well as accelerated weathering tests in the laboratory indicate that such products may have a long service life.

When a PVC roof waterproofing membrane hold an NBI Technical Approval, NBI expect a normal service life of at least 25 years when applied according to the producers guide and when subjected to inspections and necessary maintenance..

NBI Technical Approvals Nos 2008 and 2010 granted Protan PVC Roof Waterproofing.
Membranes are based on these contracted presuppositions epectation.